|
|
|
 |
| |
|
Why BCD ??? |
| |
-
B.C.D.’s complete line of bathtub services
can rejuvenate any type of bath tub situation
(slip resistance, chip repairs, Re-glazing when
all other avenues have been depleted)
-
Guarantees
your tubs will exceed the ASTM F-462
Standard and not fall below for the life of the
tubs depending on the manufacture and the type,
cast Iron, Steel, or fiberglass.
-
Soft
Blast process requires no room down time.
Room remains in service with continued
guest occupancy.
B.C.D.’s equipment is self contained and
requires no additional waiting time as we
soft blast and vacuum at the same time,
either the entire bottom or with our template.
Applied finishes require a 24 hour period
to dry with no guests in the room
B.C.D. will offer the best cleaning
chemicals and provide
detailed training to your staff.
-
Deliverables and cost benefits are just the
start...
Guest
satisfaction is what counts! A satisfied
guest is returning dollars to your property.
Women guests typically do not like mats of any
kind to take a bath.
|
|
|
 |
|
Custom slip guard templates are available for all
manufacturers! |
| |
| |
|
National Safety Council Research
Historically has shown: |
|
 |
- Hotels, Motels, Inn’s and Hospitals have not met the
C.O.F. standard on their bathtubs or shower areas, due
to poor safety programs and failed previous processes.
|
- Most bathtub’s factory slip resistance is guaranteed
for one year but fail with in that year or can last a
maximum of 5 years if not properly maintained often.
Improper cleaning processes removes friction and voids
the manufacturer’s warranty.
|
- Other slip guard processes are costly and have no
longevity resulting in repetitive un warranted budget
expenditures.
|
- Hotels are continually at risk, exposing there
property of being negligent in a court of law, when a
serious fall occurs.
|
- Soft Blast etching has a proven track record of
exceeding
ASTM standards after 30 years!!
|
|
Disclaimer: Tubs previously painted and
having applied glued down mats cannot be guaranteed against
rust caused by adhesives associated with rubber, or other
type of mat. Adhesives gradually break down paint resulting
in rust stain appearance. BCD can guarantee provided the
tubs can be pre-inspected by BCD, and the proper treatment
is agreed upon.
|
|
Click here for the BCD
Bluebook! (30MB) |
|
|
|
To request a web-based Soft Blast video demo:
vince@slipprevention.com |
|
|
